Sunday, December 30, 2012
So with the grouting given an overnight dry, it's time to cover the bases with the usual "desert arable" finish, which is ochre, plus a touch of green to take the burnt look off it, plus PVA (white glue) to ensure anything sprinkled onto it stays there. Again I use the chisel-tip brush to get the paint right around each figure's feet. A quick sprinkle of grit and medium green flock completes each. Barring the summer grass effect. Woodland Scenics' grass is something I'm still feeling my way into. I have yet to find an ideal method of applying it. This time, I blob a glob of PVA onto a mix tray then dump a clump of grass on. Slopping the resulting dripping mass onto a base I use a craft knife (a SHARP craft knife!) to slice into the middle of each clump. As the knife slices the grass apart it drives the clump into the grouting, pushing the ends up and leaving a reasonably convincing grassy growth. This will only work with this particular grouting, which stays workable for much more than a day. After the glue has dried, I use tweezers and sharp knife to separate the strands of grass more. I should try this next time while the glue is still wet. But the advantage of waiting until dry is that the grass can be easily trimmed down to appropriate heights. I do this with small sharp scissors - sewing scissors would be about right. So here's a summary of what I've achieved: Added blades:
Saturday, December 29, 2012
So the weather stays cool (and damp) and great for painting. I power through the 2nd coat of white for the kilts, the browns (mid brown first for most of the gear, then the pale brown and dark brown) and flesh highlights once the dreaded eyes are on. Very little of this is needed - I seem to have gotten the wash of flesh colour over white base just right this time. For the latter I fall back on the two lines of brown for each eye - one for the eyebrow one for the eye itself. It's basic but these figures just aren't clear enough to try the full eye again. Then dark brown again for "lining out" the detail, and a few sparse colours for the kilts. It doesn't take long for them all to dry, and so on to the outer varnish of stain. This protects the mini from almost any damage, and incidentally brings out the detail by providing a natural shade in hollows. Thin it down so that the detail doesn't get smothered, and you have no problems. Once the minis are all done and dry, it's on to the bases. Trusty coloured (terracotta) latex grouting, smoosh each mini right into it, then use a stiff brush - an artist's chisel-tip brush is best - to "paint" the grout over each base. Then add a few strategic "rocks" from fine gravel, and wait for them to fully dry.
Friday, December 28, 2012
As those of you that live in this hemisphere know, it's been hot. Too darn hot. The just-right-to-paint light and heat of spring and early summer have gone and the days of high summer are here. Luckily for my self-esteem, the temperature dropped from Boxing Day and my motivation rose in reverse. I've had nearly 20 more "Later Amorite" foot waiting to be converted from their original Atlantic Egyptian form for... well... a month or so. This is how army building goes. I buy some elements and make them (Mitanni Chariots) then I hunt around for the rest of the army and make those (the conversions previously covered) and then I look for what can be morphed out of those. In this case it's the obvious: I planned to make "Mitanni" foot from the occupied commoners of the region, mainly Amorites. So by adding some further Amorite elements I get the Later Amorite army. This is the Later Amorite army list in DBA 2.2: 1xLCh or 4Bw(Gen) 4x3Bd 2x4Ax 2x2Ps 2x3Ax 1x7Hd or 2Ps Of these, I already have 3x2Ps, 1x7Hd, and 2x3Ax - although it may prove the Ax have to be Bd. So I have to come up with at least 4Bw, 6Bd, and 8Ax figures, with an option for a chariot general figure as well. Adding the greystuff really took the longest time. This is partly because I've been in two minds about adding armour. I've ended up by deciding that even my Blades will have no armour. So oddly enough the Hd will have the heaviest armour. Unfortunate. However! I've finally got the greystuff on, added javelins to the Ax, added shields where needed (I carved some shields down from the original, in quite a number of cases.) The base varnish, base white paint and initial flesh are all done. Yay me! There's a superstition that if you don't finish a project by New Year you are doomed to still have unfinished projects the following year. I wonder if the weather will stay cool enough to finish this army?